A home built to Passive House principles is warmer, quieter, and takes much less energy to operate. That’s why more people building custom homes on Vancouver Island are asking for one.
At Lacasse, we build to those principles, and then test the results. Three of our recent projects met the Passive House airtightness target on blower door tests. Here’s what the Passive House principles are, how they shape design and construction, and what to ask any builder who says they can deliver them.
Passive House is a building performance standard developed by the Passive House Institute in Germany and promoted in Canada by Passive House Canada. It’s a set of targets for how little energy a building needs to stay comfortable, along with five principles for getting there.
The word passive refers to where the heat comes from: in a well-built passive home, most of it comes from the sun, the people inside and everyday appliances, and very little from a heating system.
The house is sealed so that air only comes in and goes out where it’s meant to. Gaps around windows, wiring and plumbing let heat escape and let moisture into the walls. An airtight home holds its heat and keeps moisture out of the walls.
Insulation wraps the whole house, walls, roof and foundation, without breaks. A gap in the insulation is a cold spot.
A thermal bridge is any place where a material that conducts heat runs from inside to outside, like a concrete slab edge or framing that bypasses the insulation. Heat takes that shortcut. Designing thermal bridges out keeps interior surfaces warm and prevents the cold spots where condensation and mould start.
Windows are usually the weakest part of a wall. Passive House calls for highly insulated glazing and frames, careful installation, and window placement that lets in winter sun without overheating the house in summer.
A sealed house needs a dependable supply of fresh air. A heat recovery ventilator, or HRV, runs continuously, bringing in filtered outdoor air and sending stale air out. As the two streams pass each other, the outgoing air warms the incoming air, so you get fresh air without throwing away the heat.
None of these concepts do the job on their own. Airtightness without ventilation makes a stuffy house. Excellent windows in a leaky wall don’t accomplish much. The principles are designed to work as a whole system, which is why they must be planned together from the start.
A certified Passive House goes through detailed energy modelling, documentation and review by an accredited third-party certifier, then testing to prove it meets every target. Certification is rigorous, and it adds cost and time to a project.
Many of the clients we talk to want the performance more than the plaque. The principles lead to better performance. Certification is the paperwork that proves every target was met.
If you’re talking to builders about a high-performance home, these are worth asking any of them, us included:
BC Housing’s guide to hiring a builder compares two ways of building a custom home. In design-bid-build, the plans are finished first and builders bid on them afterward. That can be competitive on price, but design and construction don’t always line up, and that’s where budgets go sideways. In an integrated design process, the builder, designer, engineers and key trades work together early in the design process. This leads to more accurate estimates, fewer budget problems, and better energy performance.
For a home built to Passive House principles, early involvement is the only way it works. The orientation of the house, the size and placement of the windows, where the ventilation runs and how the air barrier wraps every corner are all design decisions. If they’re wrong on paper, no amount of care on site will fully fix them.
We get involved as early as possible. Sometimes that means joining a design team that’s already in place. Sometimes it means helping a client put that team together. Either way, we’d rather be at the table while the house is still ideas on a page.
Airtightness comes down to details, and most of them end up hidden behind finishes. On a home built to Passive House principles, the whole crew treats the air barrier as something to protect, not just something to install.
That means a continuous air barrier joined carefully at every seam, corner and transition. It means sealing every penetration for wiring, plumbing and ventilation, and sequencing the work so later trades don’t cut through what earlier work sealed. The best results come from testing during construction, while leaks can still be found and fixed, rather than only at the end.
It takes more planning and more care than a standard build. This is the kind of work our crews love to do.
A blower door test is how you find out whether a house is as tight as it was meant to be. A powerful fan is fitted into an exterior doorway and used to pressurize or depressurize the house. How much air the fan has to move to hold that pressure shows how much is leaking through the building, and a technician can walk the house to find exactly where.
The Passive House airtightness target is one of the strictest in building and far tighter than the BC Building Code requires. Alder Grove, Driffield and Port McNeil each met the Passive House airtightness target on blower door tests.
Our climate is mild, but it’s wet. Long rainy seasons and wind-driven rain mean that how a house handles moisture matters as much as how it holds heat.
A tight, well-insulated wall stays drier when it’s designed properly, because warm, moist indoor air can’t leak into it and condense. It also has to be able to dry out if water ever does get in.
Ventilation matters on the island too. A heat recovery ventilator keeps fresh, filtered air moving through the house year-round, which helps manage indoor humidity through the damp months.
BC’s building code has steadily raised the bar for energy efficiency in new homes. The BC Energy Step Code measures performance with energy modelling and the same kind of blower door test described above. Requirements vary by municipality and change over time, so check with your local building department or energy advisor for what applies to your lot. Incentives for high-performance construction come and go too, so it’s worth asking about them early in design.
A home built to Passive House principles is designed to go well beyond code minimums.
We’ve been building on Vancouver Island since 1988. Building to Passive House principles is how we create homes that are meant to last for generations: tight, tested and comfortable through every West Coast winter.
If you’re planning a custom home and want to talk about building it to Passive House principles, please get in touch.